Please choose from the options above to see price and availability.
Compared to the previous generation of products, we made the following improvements:
1. Improved use experience. Before, when user changes ringtones, and hold Music Button over 3 seconds, it will trigger clean pairing function, so wrongly believed the product damage, but is not. We improved the manual and extended 3 seconds to 5 seconds.
2. The span of 4 levels volume is more wider, no longer concentrated in short interval, so that it can be more quieter or more louder.
3.Apart from "Ding Dong、Ding~Dong~,etc",we added in more ringtones,just like chord,jazz,folk music and so on,to meet the individual needs of customers.
4. The communication range is farther and the ability to penetrate the wall was enhanced.
Use in Out-Of-The-Box Mode (Work on default ringtone):
Step1: Insert the receiver into the socket.
Step2: Find a suitable location, stick the transmitter or fix it with a screw (Tips: remove the battery protective film) , thus ok.
Use in DIY Mode (Not required, Optional):
If you want to change default ringtone, or do DIY(e.g. increase new device, make transmitter trigger different tune, etc):
Step 1: Set favorite tune for a receiver.
Step 2: Press and hold the Volume Button for 5 seconds until its light flash, then press the button on an individual transmitter within 5 second. Thus you have finish register this transmitter to this receiver.
For multi-transmitters: Repeat Step1-2 to register another transmitters to this receiver. Thus all of transmitters have been registered to this receiver and trigger different tune.
For multi-receivers: Please set receiver one by one, to register each transmitter to each receiver.
2*double-sided adhesive tape