Real time video and talk:Answer the door wherever you are, you can check security camera's video feed without getting up from your seat;
PIR motion detector: If someone stand at your gate and don't press your doorbell, it will keep snapshot of visitors automatically and send inform to your mobile phone;
Waterproof:Wifi Video Transmitter is Waterproof can acceptable for outdoor using
We provide two options to powered on the device:
1)AC adapter(Requires a transformer of at 16V-24V).
2) 5V DC adapter.
PHYSEN HD video camera doorbell requirement from exiting doorbell is between:16-24VAC.
If there is no power from exiting doorbell,you may use the supplied indoor 5V DC adapter to supply power.
The below steps can help you install the doorbell:
1: Remove old doorbell:
1.1 Remove existing(old) doorbell;
1.2 Disconnect low voltage wires from the old doorbell button;
2.1Install bracket:To install doorbell in an angle,install the wedge with the bracket.
Notice: Do not connect AC & DC both at the at the same time
3.1 For DC Jack: Just use the supplied indoor 5V DC adapter to supply power from inside your home.
3.2 For AC connector:Insert disconnected 2-low voltage wires into the connector at the back.
Cable will lock if it is insert properly,Pull the cable to test.
4:Slide the doorbell from Top to bottom on the bracket.
5:Install the safety screw at the bottom of the mounting bracket.
1*Camera doorbell transmitter
1*Mounting bracket( Have attached at the back of the camera doorbell before leaving manufacture and you can check it at the back of the camera doorbell transmitter)
1*5V DC adapter( The length of the adapter power cord is about 150cm)
With PHYSEN motion-activated camera, two-way audio and brilliant HD video, you'll never miss a visitor again. See, hear and speak to visitors at your door in real time from your Smartphone or Tablet-even if you're not at home.
Easy installation: Simply download the free mobile app and follow the on-screen instructions to register your wireless doorbell. Next, screw the mounting bracket to your doorway. Then, place the WIFI doorbell into the bracket and tighten the security screw
Expandable:The WIFI video doorbell can pair with 1 or more plugin chimes(receivers) as you want,just following the doorbell pairing instruction to make them paired before using is fine.Receiver is included
PIR motion detector:If someone stand at your gate for over 5-10 seconds and don't press your doorbell, it will keep snapshot of visitors automatically and send inform to your mobile phone.Get real-time live view by the 160° wide angle HD camera.
Night vision and IP55 weatherproof:IP 55 Waterproof and Night vision support infrared LED's allow you to record footage even in dim lighting's rain night